| RIG |
Gardner Denver 2500, Serial No. 2500-77 |
| Carrier |
Semi Trailer Tri Axle (Reg VIC) |
| Depth Capacity |
5200 ft (1,600 m) |
| Mast |
GD2500, (Hydraulic raised, free standing)
Height 25 metres
Width 2.6 metres
Capacity 140,000 Ibs (63,500 kg)
Setback 130,000 Ibs (59,000 kg) |
| Engine Transmission |
Detroit 8V/92 TA 450 BHP Allison 5860 5 speed with TC 590 Torque converter |
| Rotary Table |
Type: Ideco Model 175t oil bath
Speed: 5rpm to 200 rpm
Torque: 50,000 Ibs/ft (6,910 Kgf/m 68 kN/m) |
| Feed System |
| Capacity: |
Range 2 doubles or Range 1 triples |
| Travelling Blocks: |
2x GD model TB40-321 on Kelly line and on hoisting line (fitted with Web Wilson Hydra Hook and swivel lock) |
| Swivel: |
GD Model SW75 oil bath with yoke assembly, 76 tonne dead load, 38 tonne capacity at 100 RPM, 2.5" water passage, 3" NPT connection |
| Kelly: |
11.6m long square either 3.5" with 3.5" IF pin or 4.5" with 4.5" IF Pin |
| Pull down/Holdback |
Twin disc PO 311 air clutch to hydraulic drive, 2x 2.5" pull down ASA simplex chains. Swivel, yoke & Kelly on runners and can retract back into mast. |
|
| Winches |
| Type: |
GD2500 Triple Drum winches, lebus lagged for ¾" cable |
| Clutch: |
2Twin Disc type PO 218 air |
| Single Line Capacity: |
18,000 Ibs (8,195 kg)
Sand line 13,300 Ibs (6,032 kg) |
| Spooling Capacity: |
790m of ¾" cable.
Sand line 1,595 m ½" cable |
| Pull down/Holdback |
Twin disc PO 311 air clutch to hydraulic drive, 2x 2.5" pull down ASA simplex chains. Swivel, yoke & Kelly on runners and can retract back into mast. |
|
| Cat Heads |
Foster 35 & 36 series spin up make and break air operated. |
Download PDF
